欧标带轮锥孔检验标准
一 欧标锥孔尺寸
规格 大端直径 锥孔长度 小端尺寸 轮毂直径
1008 φ35.1+0.07 22+0.2-0.2 φ32.03 φ56
1108 φ38.28+0.07 22+0.2-0.2 φ35.2 φ60
1210 φ47.6+0.1 25+0.2-0.2 φ44.1 φ75
1610 φ57.15+0.1 25+0.2-0.2 φ53.65 φ92
2012 φ69.85+0.1 32+0.2-0.2 φ65.38 φ105
2517 φ85.73+0.1 45+0.2-0.2 φ79.44 φ120
3020 φ107.96+0.1 51+0.2-0.2 φ100.83 φ155
3535 φ127+0.1 89+0.2-0.2 φ114.55 φ175
4040 φ145.9+0.1 102+0.2-0.2 φ131.63 φ205
4545 φ161.78+0.1 114+0.2-0.2 φ145.84 φ230
5050 φ177.65+0.1 127+0.2-0.2 φ159.89 φ250
二.检验:
1.用锥度塞规检验,塞规上表面与端面平或陷入0.7MM.
2.用塞规研锥面,接触面不小于80%.
新乡市亿通机械有限公司
2005.4.2
? 螺栓套是专门为锥套的联接而设计的.它为我们
? 提供了很大的方便,广泛应用于风扇转子,叶轮????
? ,搅拌器以及其它一些必须牢固的安装到轴上的
? 零件。我们生产的螺栓套按锥套的安装方向有BF
? 和SM两种规格。它们是用符合GG22标准的优质
? 铸铁制造而成。
?Taper Bore Bolt-on Hubs are designed for use ?
? with the univesally accepted Taper Bush.They?
? provide a convenient means of securing fan ?
? rotors, impellers, agitators and other devices
? which must be fastened firmly to shafts.
? Our producted Bolt-on-Hubs,type BF and SM
? complete the range. They are manufactured ? from GG22 cast???????
? iron and are phosphated for ? extra rust protection.
?